AIS signals commonly reach about 20 to 30 nautical miles, though antenna height and the radio horizon shape the range. Learn how VHF line-of-sight transmission affects vessel visibility, and why AIS works best alongside other navigation information in busy waters.

Multiple Choice

What is a typical expected AIS range at sea, depending on antenna height?

The expected AIS (Automatic Identification System) range at sea, which can vary depending on several factors, is generally between 20 to 30 nautical miles. This range is influenced primarily by the height of the antennas used on the vessels. A higher antenna allows for a greater line of sight, thus increasing the effective coverage area for AIS transmissions. AIS operates in the VHF maritime mobile band (typically around 156.025 MHz) and employs Line of Sight propagation characteristics. Therefore, as the height of the antennas increases, the range of AIS communications also increases. While there can be variations due to environmental conditions and the radio horizon, under normal circumstances, 20 to 30 nautical miles is a realistic average expected range when considering standard operational conditions and equipment height on vessels. This understanding is crucial for navigating and ensuring situational awareness at sea, particularly in busy shipping lanes or in conjunction with other navigational aids.

AIS Range at Sea: What ECDIS Can—and Can’t—Show

An AIS target may appear on an Electronic Chart Display and Information System (ECDIS) long before it comes into view from the bridge. But how far away can that target really be? For ship-to-ship communication, a typical AIS range is about 20 to 30 nautical miles, though antenna height and local conditions can push it higher or bring it lower.

That range matters because AIS helps crews build a picture of nearby traffic. It can show a vessel’s identity, position, course and speed on an ECDIS display. Still, AIS is a radio system, not a magic window over the horizon. Understanding what shapes its range—and where its limits lie—helps put the information on screen in context.

Why antenna height matters so much

AIS uses radio signals in the VHF maritime band. Its signals generally travel by line of sight: the transmitting antenna needs a reasonably clear path to the receiving antenna. Since the Earth curves, two antennas close to the water can’t “see” each other over unlimited distances.

Raise one or both antennas, and the radio horizon expands. That’s why an AIS signal from a tall ship may reach farther than one from a low vessel. The height of shore-based AIS antennas matters, too; a station on a coastal hill can receive signals from farther offshore than one at sea level.

For a rough estimate, the radio horizon in nautical miles can be calculated as:

Distance ≈ 2.23 × (√height₁ + √height₂)

Here, the antenna heights are measured in metres. It’s a guide, not a promise. The sea is rarely a neat geometry problem, and real-world reception can vary from one voyage to the next. Even so, the formula shows the basic relationship: higher antennas usually mean greater range.

With typical shipboard antenna heights and normal conditions, 20–30 nautical miles is a sensible expected range for AIS reception between vessels. A 30–40-mile range can occur when antennas are higher or conditions are favorable. It shouldn’t be treated as guaranteed coverage.

A signal with a job to do

AIS stands for Automatic Identification System. It transmits short digital messages that nearby AIS stations can receive. These may include a vessel’s identity, position, heading, course over ground and speed over ground. Some information is entered by the crew, while other details come from connected ship systems such as the GNSS receiver and gyrocompass.

The system uses two designated VHF channels: AIS 1 at 161.975 MHz and AIS 2 at 162.025 MHz. Transmissions are shared across these channels using a system designed to help many stations communicate in the same area. The messages update at different intervals depending on a vessel’s movement and status. A ship changing course quickly may transmit position updates more often than one moving steadily.

On ECDIS, received AIS reports can appear as symbols over the electronic chart. Selecting a target may reveal more details, such as its name, call sign or destination, when that information is available. This gives the bridge team useful context: a symbol isn’t just a dot, but a moving vessel with a reported track and identity.

That context can help crews assess traffic, especially in busy routes or near a port. But the display still depends on signals reaching the receiver, the information being entered or supplied correctly, and the equipment working as intended.

Why the number can change

A 20–30-mile range is an average expectation, not a fence around the ship. Several factors can change what appears on the ECDIS display:

  • Antenna height and condition: Height affects the radio horizon. Damage, poor connections or installation issues can weaken reception.

  • The vessels involved: A tall passenger ship and a small workboat won’t always have the same antenna heights or transmission setup.

  • Coastal terrain and structures: Cliffs, buildings and other obstructions may block or weaken a signal.

  • Radio conditions: Weather and atmospheric effects can occasionally extend VHF propagation beyond its usual range. Such long-range reception is possible, but shouldn’t be relied on as routine coverage.

  • Equipment and traffic load: Receiver performance, configuration and the number of transmitting stations in an area can affect what gets through.

AIS range can also feel different depending on where a ship is sailing. Offshore, a crew may see targets across a broad stretch of open water. Near land, islands, headlands or port infrastructure can interrupt signals in ways that seem surprising at first. A missing target, then, doesn’t automatically mean that a vessel is absent from the area.

Reading the picture, not just the symbols

ECDIS brings chart information and sensor data together, but it doesn’t make every source equally reliable. AIS is best treated as one layer in the navigation picture. Radar, visual lookout, the chart, soundings and other available equipment all add information that may confirm—or challenge—what an AIS target suggests.

For example, AIS may show a vessel’s reported position and course, while radar gives a separate view of detected objects. If the two pictures don’t match, the difference deserves attention. The AIS position may be delayed, entered data may be wrong, or radar may be detecting an object that isn’t transmitting AIS. Neither display should be accepted blindly.

A target can also vanish from the screen when it moves beyond reception range, even though its last reported symbol remains visible for a time, depending on the system’s settings. The age of the information matters. A position that was accurate a few minutes ago may no longer represent where a fast-moving vessel is now.

This is one reason bridge teams pay attention to more than a target’s distance. Course, speed, closest point of approach and time to closest point of approach can help describe how a traffic situation may develop. Those figures need sound judgment, too; they’re calculated from reported data and can change as the vessels move.

AIS has limits—and that’s useful to remember

AIS is valuable, but it isn’t a collision-avoidance system by itself. Not every vessel carries AIS, and a vessel that does carry it may have its equipment switched off or may be transmitting incorrect details. Small craft, some fishing vessels and certain military vessels may not appear as AIS targets. In a crowded area, a screen full of symbols can also make the overall picture harder to read.

There’s a subtle point here: more information doesn’t always mean more certainty. AIS can make a vessel easier to identify, but it can’t guarantee that its reported position, identity or intentions are correct. It also can’t show every floating object, hazard or vessel near the ship. A radar echo or visual sighting may reveal something AIS doesn’t.

So, what should a navigator take from the 20–30-mile figure? It’s a useful expectation for ordinary ship-to-ship reception, shaped chiefly by antenna height and line of sight. It helps explain why distant targets may appear on ECDIS—and why others may not.

The best view of the sea comes from combining sources. AIS adds identity and movement data; ECDIS places that data in relation to the chart; radar and visual observation provide other ways to assess nearby traffic. Each contributes something different. Together, they offer a much stronger picture than any single screen can provide.